Receiver converts the optical data coming from the AD-box
to an USB2 output. In addition, the USB2 receiver has a trigger
port with 16 independent trigger
inputs and 16 independent trigger outputs. This setup keeps
the complete stimulation setup galvanically isolated from the subject.
The trigger output signals can be controlled with an extra independent
LabVIEW thread integrated in the BioSemi acquisition software. The
trigger inputs allow easy setup of EP/ERP measurements, and event
New USB2 Receiver offers extremely setup and installation (Plug
and Play) combined with fully reliable high speed data throughput.
A 256 channel 24bit ActiveTwo system at 4096kHz including a 32 channel
Analog Input Box at 4096kHz has a total data throughput of 3.54MByte/sec.
The ActiView acquisition
software streams this data reliable to disk.
USB2 receiver allows the ActiveTwo system to be used with both desktops
and notebooks. With the notebook option, you can realize a completely
portable (everything fits in a small bag, less than 4Kg including
notebook) 256 channel EEG/ECG/EMG system, independent of the mains
USB2 standard interface.
Large (4Mbit) internal buffer for guaranteed Gap-Free data streaming
to the PC.
Fully powered though the USB2 port. (no extra adapter needed)
37 pin Sub-D connector at the back provides 16 input and 16 output
Trigger inputs remain galvanically isolated from AD-box, electrodes
LED indicator for indication of data coming from the fiber.
LED indicator for indication of data communication with USB2 port.